Thetford N614E.3F, Руководство по установке

Страница: 7 / 16

Installation / Owner’s Manual 7
- If the depth of the enclosure is more than 660mm, install a wood or an aluminum
or galvanized sheet solid box baffle [21] in the rear of the enclosure (See Art02267
and Art02268).
- Make sure that the bottom of the solid box baffle is 455mm to 470mm above
the bottom of the enclosure [17] (205mm to 220mm above the top of the lower
intake vent opening REF) [18] .
- Make sure that the back of the solid box baffle is perpendicular to the bottom of
the enclosure.
- Make sure that the back of the solid box baffle is either against the top of the
enclosure or against the angled baffle [13] (depending on the vehicle design).
- Make sure that the solid box baffle is 25mm or less [19] from the coils [10]
and condenser [11] of the refrigerator.
- Make sure that the solid box baffle is the full width of the inside of the
enclosure.
- If the design of the vehicle does not allow you to install a roof exhaust vent, install
an upper side-wall exhaust vent.
The refrigerator is 602mm to 610mm max. from the rear of the breaker
to the rear of the condenser [22] and 1196mm to 1204mm max.
from the bottom of the refrigerator to the bottom of the refrigerator
condenser [23] (See Art01601).
Only use an upper side-wall exhaust vent on refrigerator
models that are equipped with a fan. If you use an upper
side-wall exhaust vent on a refrigerator model that is not
equipped with a fan, the refrigerator cooling performance will
be poor.
- Make sure the refrigerator model is equipped with a fan.
Art02267
21
11
19
12
15 13
14
9
17
10
18
Art02268
11
18
10 17
9
20
14
13
12
21
19
22
23
Art01601
CAUTION
!
NOTICE