![Thetford N604.3 Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/thetford/n604-3/n604-3_installation-and-owners-manual_1106632012.webp)
Installation / Owner’s Manual 12
- Remove the flare nut from the orifice assembly [77] (See Art00956).
- Remove the orifice assembly from the burner [78].
WARNING:
Do not try to remove the orifice [79] from the orifice adapter [80] when cleaning. Removal will damage the
orifice and seal of the orifice and can cause a propane gas leak. Leaking propane gas can ignite or explode which can
result in dangerous personal injury or death. Do not clean the orifice with a pin or other objects.
- Clean the orifice assembly with air pressure and alcohol only.
- Using a wrench, assemble the orifice assembly to the burner.
- Assemble the flare nut to the orifice assembly.
- Tighten the flare nut by hand.
- Hold the orifice assembly securely and, using a wrench, tighten the flare nut 1/4
revolution only.
- Examine all of the connections for gas leaks.
- Clean the burner box.
- Assemble the burner box cover.
- Assemble the drip cup.
!
Remove the Refrigerator
NOTE: Your dealer or an authorized Thetford Service Center must do this procedure.
CAUTION:
The rear of the refrigerator has sharp edges and corners. To prevent cuts or abrasions when working on the
refrigerator, be careful and wear cut resistant gloves.
1. Close the valve at the propane gas tank(s).
WARNING:
To avoid possible propane gas leaks, always use two wrenches to loosen and tighten the gas supply line at
the refrigerator’s manual shut off valve.
2. Open the lower intake vent and remove the gas supply line from the manual shut off valve of the refrigerator.
3. Remove the AC power cord from the power point.
4. Remove the DC wiring from the refrigerator:
- Remove the DC wiring from the battery or the converter of the vehicle.
- Put a mark on the DC wires so you can put them back in the correct location.
- Remove the DC wires from the refrigerator.
5. Remove the screws from the mounting flange at the rear of the refrigerator.
6. Remove the top trim by gasping firmly and pulling to disengage the metal mounting clips.
7. Remove the screws from the upper and lower mounting flanges on the front of the refrigerator.
8. Remove the refrigerator from the opening.
!
!
Art 00956
77
78
79
80