background image

Thetford Customer Support 

Telephone:  (61) 03-9358-0700

Fax:  (61) 03-9357-7060

Web Site:  www.thetford.com.au

WARNING:

  

Improper installation, adjustment, alteration, service or 

maintenance can cause personal injury or property damage.  Refer to 

this manual.  For assistance or additional information, contact a qualified 

installer, service agency, or the gas supplier.

FOR YOUR SAFETY  

Do not store or use gasoline or other flammable vapors and liquid in the 

vicinity of this or any other appliance.

FOR YOUR SAFETY

If you smell gas:

1.  Open windows.

2.  Don’t touch electrical switches.

3.  Extinguish any open flame.

4.  Immediately call your gas supplier.

 

Part No. 634757D (1/24/2011)

Installation and Owner’s Manual

For Australian refrigerator model: 

N604.3 (181 liter 3-way operation with propane gas, 240 volts AC, or 12 volts DC )

WARNING:

  DO NOT install this refrigerator in below deck marine applications.  Do not install this refrigerator in fixed 

indoor cabin or other dwelling applications. This refrigerator must use only Thetford designed and approved outside 

air intake and exhaust ventilation for correct and safe operation.  Any other ventilation could cause lethal combustion 

exhaust fumes and/or explosive propane gas fumes to be in the living area and/or to be below deck.

Thetford Australia

41 Lara Way

Campbellfield, VIC 3061

!

!

Содержание N604.3





























Отзывы: