background image

 

 

14 

 

 2.2 

Warnings 

 

-

 

Install the refrigerator in accordance with the manufacturer’s instructions and 
local/national laws. 

-

 

Incorrect installation or maintenance  of the refrigerator may cause physical injury and/or 
damage to the refrigerator.  

-

 

Never use naked flames whilst performing maintenance or repairs on gas lines or when 
checking fittings for leaks. Gas may ignite and cause an explosion resulting in serious 
physical injury and/or damage to the product. 

-

 

Never reposition  or change the  electronic or gas components or parts.  

-

 

Never open or damage the  cooling device  at the rear of the refrigerator. The cooling 
system is pressurized and contains substances harmful to health.   

-

 

There are sharp  edges and corners  at the rear of the refrigerator. Always wear protection 
against cuts when installing the refrigerator.     

-

 

Install the refrigerator somewhere completely isolated (insulated) from the living area of 
the caravan or motor home. Air for the burner must not be drawn from the living area of 
the caravan or motor home and combustion  gases must not enter the living area. 
Combustion  gases may contain carbon monoxide. Inhalation of this gas may cause 
tightness of the chest, dizziness and can lead to death.  

-

 

Never expose the refrigerator to water or moisture.  

-

 

To cool the system and to supply the burner with a sufficient airflow, m ake sure that there 
is always sufficient ventilation through the  outside vents. 

-

 

A qualified installation engineer must install the refrigerator.  

 

The refrigerator  and its extractor  must be installed in  a way that allows easy access for 
maintenance and repairs.  

-

 

The installation and connections must satisfy the most recent technical regulations.  

 
-

 

The refrigerator  is designed for powering by  liquid gas (butane and propane), 12V DC or 
230VAC.   

-

 

The performance of the refrigerator may be affected by adjacent heat sources such as an 
oven or stove. Protect the refrigerator against any heat source by fitting insulation.  

3.

 

DETERMINING WHERE TO INSTALL THE REFRIGERATOR 

 
Various possibilities exist for positioning the refrigerator in a caravan or motor home. However, the 
refrigerator’s performance depends on good ventilation. Ventilation takes place through two gratings in the 
wall of the caravan or motor home. When deciding where to position the refrigerator, you must take into 
account the best place for positioning the ventilation gratings. 

 
Always make sure that the  ventilation gratings can  never be blocked. Blocked  gratings 
reduce the supply and extraction of air. An insufficient air supply can result in incomplete 
combustion and the forming of carbon monoxide. Insufficient air extraction can also reduce 
the refrigerator’s cooling performance.   

 

FIGURE 2

: The perfect installation situations occur when the outside vents cannot be covered by 

e.g. doors.   

 

FIGURE 3

: When the refrigerator is installed next to the caravan or motor home entry, it is 

imperative that the door, when open, does not block the ventilation gratings.  Allow at least a 25 mm 
distance between the  ventilation gratings and the door.   

 

 

 

FIGURE 4

: In this situation, combustion  gases may enter the living area. Such installation 

situations are thus not recommended.    

 

2. 

3. 

4. 

ENG 

Содержание N100




















Отзывы: