Tecma S.r.l.
Via Flaminia | Loc. Castello delle Formiche
05030 Otricoli (TR)
ITALY
T +39 0744 709071
F +39 0744 719833
www.thetfordmarine.com
48
R
ev.
V
01
Compact line | Installation and use manual | ENG
NOTE
: The All-in-one control panel allows you to adjust the amount of water used
during the flushing cycle. A regulator placed at the back of the panel increases the
amount of water if turned clockwise or decreases it if turned anticlockwise. The
recommended water level is 1 cm above the ceramic outlet.
4.3
Multiframe SFT control panel
Function
Press the “BEFORE USE” button before using the toilet. This will fill the toilet with a small
amount of water. Press the “AFTER USE” button after using the toilet. This will start the
automatic flush cycle, which will empty the toilet.
NOTE
: It is also possible to adjust the amount of water used during every flushing
cycle directly from the Multiframe SFT wall switch. A specific regulator placed on its
rear increases the amount of water if turned clockwise or decreases it if turned
anticlockwise. The recommended water level is 1 cm above the ceramic outlet.
WARNING
: The tank level LED is only an indicator. Do not use the system if the LED
is red.
BEFORE USE
AFTER USE
TANK LEVEL
