Tecma S.r.l.
Via Flaminia | Loc. Castello delle Formiche
05030 Otricoli (TR)
ITALY
T +39 0744 709071
F +39 0744 719833
www.thetfordmarine.com
51
R
ev.
V
01
Compact line | Installation and use manual | ENG
Changing flushing mode
The system is set on sailing mode by default. To switch from one mode to another:
1)
Press and hold the BEFORE USE and AFTER USE buttons simultaneously
2)
After 3 seconds, the sensor LED will flash: keep pressing.
3)
After 5 seconds, the perimeter LED will flash: release the buttons.
4)
The toilet will automatically do:
a.
If you are setting from Sailing mode to Mooring mode: water inlet.
b.
If you are setting from Mooring mode to Sailing mode: pump activation.
5)
Repeat the procedure to change mode again.
Fig.1: from Sailing to Mooring
SAILING MODE
1. Press and hold the BEFORE USE
and AFTER USE buttons
simultaneously
2. After 3 seconds, the sensor LED
will flash.
Hold down.
3. After 5 seconds, the backlight
LED will flash.
Release the buttons.
4. The toilet will automatically inlet
water
MOORING
MODE