17
Serial Number/Software Versions
The serial number and the software versions of the Generation VIII can be read by pressing
SETUP
once and
then button #
5
nine times (Seven if the Fixed Volume option is installed). This menu is shown in Figure 19.
Figure 19 - Front Panel Display of the Info menu
Above button #
1
is the serial number, above button #
3
is the Operating System version number and above
button #
4
is the DSP software version number.
Press
SETUP
to exit this menu, or button #
5
to go to the first
SETUP
page.
BALANCE Function
This function allows the user to temporarily set the
Left
/
Right
balance for the currently selected
INPUT
. If the
user presses a different
INPUT SELECT
button, or puts the unit into standby, the balance will return to its center
position, as shown in Figure 20.
From the
INPUT SELECT
menu, press
LEVEL LEFT
/
RIGHT
to adjust the balance.
Figure 20 - Front Panel Display of the Balance Menu
The Balance menu will remain on the display for 5 seconds and then revert to the
INPUT
SELECT
menu.
Содержание Generation VIII Series 3
Страница 1: ...THETA DIGITAL Generation VIII Series 3 Owner s Manual V 2 00 Digital Done Right...
Страница 11: ...4 Generation VIII Block Diagram Figure 1 Generation VIII Block Diagram...
Страница 25: ...18 APPENDIXES...
Страница 28: ...21 Figure 22 Example of Connections to from a Casablanca II III Digital Out Card...
