Theta Digital Casablanca III HD, Руководство пользователя, Страница: 65 / 106

65
BLU CD HDTV SERV GAME DVDA COAX1
BLU CD HDTV SERV GAME DVDA COAX1
Figure 38 - Front Panel Display of the SETUP / INP Page 2 / SOURCE/AUD Submenu
The default jack names reflect the type of jack on the rear panel.
The
INPUT SELECT buttons can be set up with 2 theories in mind. The most common used is to assign one source
device to each INPUT SELECT button. Figure 10 on page 17 depicts this setup. Another option is that each person in
a household can use one or two INPUT SELECT button(s) for himself or herself, and have up to 6 source devices
mapped to “their” INPUT SELECT button(s). Figure 39 depicts this setup. This manual is written with the first theory
in mind since as it the most commonly practiced.
To map input jacks, first press the
INPUT SELECT button. Press SETUP , INP , A-D , then SOURCE . To map the first
audio input jack, press button # 1 and use the LEVEL UP / DOWN buttons to select the appropriate jack. If another
input jack is to be assigned to the same INPUT SELECT button, press button # 2 and select the desired rear panel
input jack using the LEVEL UP / DOWN buttons. If only one mapped source is desired, choose OFF in this position.
Continue with this method for up to 3 input jacks per Input Select button.
Press
SETUP 3 times then repeatedly press the A-D button to toggle between the input jacks for the currently selected
INPUT SELECT button. Map only the input jacks that will be used, to the currently selected INPUT SELECT button.
This will eliminate needless pressing of the A-D button to cycle through unused jacks.
Note : When input jacks are re-assigned and the user exits SETUP , the new input jack mappings will not be active
until either the A-D button is pressed or the INPUT SELECT button is pressed.
Press the SETUP button 3 times to return to the INPUT SELECT page.