Theta Digital Casablanca III HD, Руководство пользователя

Страница: 52 / 106

52
SETUP Function
This function provides access to a series of submenus that will allow the configuration of the entire system. In this
section, each feature of the
SETUP menu is discussed in detail along with a diagram of each VFD display.
Note: A complete step-by-step speaker configuration setup guide is located on page 22.
Pressing the SET-UP button once changes the front panel display to the first page of the SETUP menu, shown in
figure 17.
Figure 17 - Front Panel Display of the SETUP Menu
As indicated in figure 18, button 1 is assigned to features that are stored by input and leads to submenus on 3 s.
Button # 2 accesses all submenus and parameters that are global (not programmable to each INPUT SELECT ).
Button # 3 accesses the MACROS submenu and button # 4 allows the user to password protect all SETUP features.
Button # 5 displays the configuration of the installed DAC cards.
Setup Button Password
It is possible to password protect the entire
SETUP function, or have no password at all. If a password is set here, the
user will be asked to enter the 5 digit password whenever the SETUP button is pressed. To set a password for the
SET-UP button press button # 4 . The user will be asked “ ARE YOU SURE YOU WANT TO ENTER A PASSWORD
FOR THIS MENU? ” Choosing “ YES ” (the A-D button) will display the following page:
Figure 18 - Front Panel Display of the SETUP / Assign Password Display
Use buttons
1 - 6 to assign a password. If no password is to be used (factory default), press the A-D button five times,
entering all zeros. All zeros, or a zero anywhere in the password negates the password.
CAUTION : It is imperative that all passwords be written down. If forgotten, ALL access to the SETUP menu will be
denied. Please see the WARNING on page 19.
DAC Configuration
Pressing button # 5 allows the user to view the channels assigned to each DAC card. This is an information page only
and may not be edited. As an example, the first page will say “ LEFT FRONT CEN ” if a three-channel Standard or
Superior balanced DAC card is in DAC slot # 1. Press the A-D button to view the channels assigned to the second
DAC card. Press the A-D once more for the third DAC card, if installed. Press SET-UP once to exit this menu.
The following section will discuss all menus and parameters under the INPUT button.