2
1.
WARNING!
Before installation and operation, please refer to the "operating Instructions" (hereinafter the
"instruction").
In connection with the still ongoing work to improve the quality of the product, the design of
products can be changed and not included in this manual, however, does not reduce the
performance of the product.
2. GENERAL
This manual is designed for convector electric THERMOVAL model T17 and TX (hereinafter
referred to as heaters).
Heaters belong to the class of modern heating equipment stationary type, using hot air for
heating buildings and building installations.
Radiators with degree of protection IP20 are designed for use in traditional areas. Radiators
IP24 protection against water droplets, are intended for use in all types of premises.
Heaters are designed for fixed installation on the wall, but their design also allows for
installation on the floor, movable or immovable legs, which are purchased separately.
Heaters are provided with a thermostat to adjust and maintain the desired temperature in the
room regulator staged output power in a protection against overheating, and protection of
rooms against freezing (to keep the room temperature in the range of from + 5 to + 7
°
C.
which prevents freezing room while maintaining the lowest level of power consumption).
The regime of work - all day, automatically.
When buying a heater, be sure to check that the device is functioning properly and is free from
mechanical damage and whether the supplied set of elements is consistent with the list by. p. 3
of this manual. Carefully check the completeness and correctness of the fulfillment of the
guarantee and coupons are cleaved and the presence of a stamp dealer.
Keep proof of purchase, this manual, warranty card and packaging during the warranty period
of the heater. Attached to the radiator while sales documentation in the event of loss can not
be restored.
REMEMBER:
failure to comply with these recommendations, in case of mechanical damage,
can lead to loss of the right to warranty service.
TECHNICAL DATA
Supply voltage, V 230
±
10
Frequency 50 Hz
± 1
Class of protection against electric shock II
The degree of protection provided by the housing IP 20 or IP 24
