Operation
GBTT3LBA_V(3).DOC
Page - 16
4.3 Printer set-up mode
Hold the Mode/Repeat button while switching the printer on to go to the printer set-up mode. The Power, Print,
and Condition LEDs are on. The current configuration is printed out in English. The printer information guides
you through the menu for the following procedure.
F
Use continuous material 100 mm wide when adjusting the printer set-up.
The printer has to be switched off and on again to go to the normal operating mode.
In this mode, the control buttons have the following functions
Pause button:
Meaning: Yes/Select/Save
used for confirmation, selection and storage
Stop button:
Meaning: No/Next Item/Change value
used for rejection and selection in the main menu
Feed button:
Meaning: Next digit
used to increase current values
Mode/Repeat button:
Meaning: Exit to previous menu
used to leave the menus
Fig. 4-2 shows the current printer parameters which can be changed using the menu.
To obtain a printout, after activating the printer set-up mode, press the Stop button for NO and then the Pause
button for YES.
Fig. 4-2 - Current printer set-up parameters