![THERMOSTAHL BIOPLEX MCL-BIO Скачать руководство пользователя страница 28](http://html1.mh-extra.com/html/thermostahl/bioplex-mcl-bio/bioplex-mcl-bio_installation-and-service-manual_1106259028.webp)
SERVICE AND MAINTENANCE
28
Fig 19.
Removing the ignition element
7.4.
Maintenance after long stop
7.4.1.
Maintenance of the boiler
It is necessary to perform a general maintenance and cleaning of the boiler after the heating
season. Clean thoroughly all the surfaces of the boiler as described in the corresponding
paragraph. Also clean the chimney box, and all the chimney parts where ash might be
deposited. After cleaning all the ash, empty the ash box and leave the boiler clean for the next
winter season.
After long stop of the boiler, before you put in function you need to perform the following
checks:
Check the condition of the electric cables and the sensors. Make sure they are not
damaged. Check that the thermometer indicates the correct temperature and all the
thermostats function properly. Make sure the bulbs are properly positioned in the case.
Make a general check of the chimney and make sure it is clean and free of obstacles.
Verify the pressure in the heating network and the boiler.
Do not empty the water of the boiler and the heating installation after the
heating season! It will corrupt all the installation and especially the boiler.
Check that all the valves are working properly. Replace them if necessary. Pay special
attention so that all the safety equipment of the boiler functions properly!
Make sure all the ball valves of the boiler and other relative equipment are open.
Check the function of the pumps. They might be blocked after long stop.
Check that there have been no modifications to the installation and the boiler room
(ventilation openings, chimney, doors).
Check the fan and clean from dust. Turn it manually to ensure it is not blocked.
Содержание BIOPLEX MCL-BIO
Страница 12: ...BOILER MOUNTING 12 Fig 4 Chimney connection...