7
Oscillating Parabolic Radiant Heater
Heater is not plugged into a 120V
polarized outlet/receptacle.
Heater will not
power on.
Ensure unit is in OFF position. Plug in
unit and attempt to turn on again.
Timer knob is on OFF position.
The timer knob must be set on ON or
timer settings 10-60 to operate.
Heater is not located on a stable,
level surface.
A non-level surface may cause the
tip-over safety switch to be activated.
Make sure the heater is located on a
stable, level surface.
activated.
to cool for 30 minutes. Once the heater
there are no objects on or adjacent to
the unit. To resume operation, plug the
unit back in.
Breaker/Fuse has been tripped.
Please check your electrical box to
confirm the breaker has not been blown.
This may occur if the unit is sharing a
receptacle with another high power
consuming appliance. Ensure unit is in
OFF position. Plug in unit and attempt to
turn on again.
Problem
Possible Cause
Solution
Troubleshooting
Power knob is on OFF position.
Make sure power knob is on I or II position.
PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE HEATER YOURSELF, DOING SO COULD
VOID THE WARRANTY AND CAUSE DAMAGE OR PERSONAL INJURY.
If the heater fails to operate, check the following before making a service call:
