6
Oscillating Parabolic Radiant Heater
Safety Features
Polarized plug
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock,
this plug is intended to fit a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, consult a qualified electrician.
DO NOT ATTEMPT TO MODIFY THE PLUG OR DEFEAT THIS FEATURE IN ANY WAY.
Tip-over switch
forward or backwards. When returned to normal upright position, the heater will automatically come on
again. This is a safety to avoid possibility of fire should the unit be accidentally tipped over.
-
heater that may cause high temperatures.
Wait approximately 30 minutes for the unit to cool down, then plug it back in and resume normal operation.
Cleaning, Maintenance and Storage
3. Storage:
Store the heater in a cool, dry location when not in use. To prevent dirt and dust build-up, it is
recommended to store the heater in its carton.
1. Before any cleaning, make sure that:
a. The heater is turned OFF.
b. Disconnect power supply at source by removing plug from power outlet.
c. Let heater cool completely before cleaning.
2. Regular cleaning:
a. Do not use cleaning liquid or other chemicals to spray on the unit.
surface of the unit. Be sure not to wet the heating element and the switches. Allow the unit to dry
completely before using it.
c. DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes or pads to clean
the heater. This may cause damage or deterioration on the heater’s outer surfaces.
CAUTION:
DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE HEATER AS THIS COULD
CREATE A FIRE OR ELECTRIC SHOCK HAZARD, DAMAGING THE UNIT.
