5
Oscillating Parabolic Radiant Heater
Product Diagrams
Operations Instructions
Control
1. Carefully remove the heater from its carton and bag.
2. Make sure the heater is located on a flat and stable surface prior to turning it on. Damage and
3. Make sure all control knobs are in the OFF position, then plug the heater in a functional polarized
outlet. Make sure plug is inserted fully in the outlet. Select power setting as per instructions below.
Power settings
Turn the power knob to the desired setting.
1.
is for low power (400 watts) without oscillation.
2.
is for high power (800 watts) without oscillation.
3.
is for low power (400 watts) with oscillation.
4.
is for high power (800 watts) with oscillation.
Timer setting
Turn the timer knob to desired timer setting.
1.
indicates that power is on; the unit runs continuously.
3. Timer settings can be set in 10-minute increments, up to 60 minutes. Once set, the heater will run
until the timer runs out.
1. Protective Grille
2.
Reflection Hood
3.
Timer Knob
4.
Power Knob
5. Base
6.
Carry Handle
7.
Tip-over Safety Switch (on bottom)
2
1
4
5
3
3
7
4
NOTE:
Do not force knobs beyond their normal position.
10
20
30
40
50
60
Front
Back
6
2. indicates power is off.
