![Thermoscreens HX1000A Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/thermoscreens/hx1000a/hx1000a_installation-and-operation-manual_1106187015.webp)
T9901008-1-1 UK (v9)
Page | 15
16.1 Verify system operation
To commission the system, verify the following conditions are met:
All fans are working.
Fans operate at Low, Medium and High speeds.
There is no excessive mechanical noise coming from the fans.
When heating is selected, the air stream from the discharge grille warms up across the whole
length of the air curtain.
When set to manual with fans set to high speed, heating increases as higher heat is selected.
Warm air reaches across the doorway with door open or closed.
Ecopower Remote Control operates correctly in both manual and auto modes.
16.2 Instruct customer and hand over
Before leaving site, hand over the installation to the customer/end user or their representative.
Explain
that any person operating the air curtain must be given supervision and instruction by the
person responsible for their safety, concerning the safe use of the unit and to understand any hazards
involved. Children and those with reduced physical, sensory or mental capabilities should not operate
the air curtain.
Recommend
that the doorway should be closed whenever possible but that during times of high
pedestrian use it will become an ‘open doorway’. The air curtain then serves an essential purpose by
saving energy and providing comfort to occupants.
Explain
that the inlet grilles and air filters (if fitted) must be cleaned regularly and the unit serviced at
schedule intervals – see section 19: Service & Maintenance.
Complete the following once commissioning is completed:
Installer signature
Customer
signature
Installer name
Customer
name
Installer company
Customer
company
Date
Date
16. COMMISSIONING THE SYSTEM
17. SIGN
OFF
NOTE:
Leave these instructions with the customer/end user or their representative!!