Grill2GO • 21
Possible Cause
Electrode(s) and burner are wet.
Electrode(s) cracked or broken
"sparks at crack"
Wire(s) is loose or disconnected.
Wire is shorting (sparking)
between ignitor and electrode.
Bad ignitor.
No gas flow.
Obstruction of gas flow.
Does Regulator/valve cap stay
down.
Disengagement of burner to
valve.
Prevention/Cure
Wipe dry with cloth.
Replace electrode(s).
Reconnect wires or replace
electrode/wire assembly.
Replace ignitor wire/electrode
assembly.
Check to see if LP tank is empty.
Clear burner tubes.
Replace with Thermos parts.
Check steps in assembly
instructions.
Problem
Burner will
not
light using
ignitor.
Burner(s)
will not
match
light
Troubleshooting - General( 1lb Cylinder)
Possible Cause
High or gusting winds.
Low on LP gas.
Burner and/or burner tubes
are blocked.
Problem
Flames blow out.
Flashback...
(fire in burner tube(s)
Prevention/Cure
Turn front of grill to face
wind or increase flame
height.
Refill LP tank.
Replace 1lb bottle.
Clean burner and/or burner
tubes.