manualshive.com logo in svg

THERMOROSSI aspiromec le, Инструкция по установке, эксплуатации и обслуживанию, Страница: 10 / 32

Поделиться
Скачать
THERMOROSSI aspiromec le Скачать руководство пользователя страница 10

INSTALLATION

page 10

5

8

5

1

2

3

6

4

7

4. INSTALLATION

4.1 MOUNTING THE OUTER CASING ON ASPIROTRONIC LE / ASPIROMEC LE.

Key to outer casing material:
2 – Top front panel
3 – Top rear panel
4 – RH side panel (2 pieces for model 102)
5 – Support profiles 
6 - Back
7 – Layer of mineral wool 
8 – LH side panel (2 pieces for model 102)

- Wrap the layer of mineral wool (7) around the heater body and fasten it using the strap and fastener; make

holes in the mineral wool for the feeler pockets, the tube bundle door and the heat exchanger covers
(optional).

- Mount the 2 support profiles (5) using M5x16 screws, washers and nuts.

- Make sure that the RH side panel (4) is correctly mounted on the support profiles then fasten it (for the LE

102 mount 2 side panels).

- Fasten the LH side panel ( 8), with the smoke suction unit power plug facing towards the back, to the

support profile.

- Fasten the top rear panel (3) to the top front panel using the hinges provided and the 4.8x25 screws.

- Lastly, fasten the back panel.

Содержание aspiromec le

































Отзывы:

Нет отзывов