31
GB
Advice
It is pointless to set your device to the maximum setting; your room’s temperature will not rise any
faster.
All the devices in the same room must be set in the same way.
IF YOU WILL BE ABSENT FOR A PERIOD OF 2 TO 24 HOURS
NB :
The absence detection sensor also enables you to ensure an automatic reduction in temperature during
your absence (see the section “How to use the energy-saving functions”).
IF YOU WILL BE ABSENT FOR A PERIOD
OF MORE THAN 24 HOURS
Set the cursor to .
Your device will maintain a tempera-
ture approximately 3.5°C lower than
the Comfort temperature you have
set.
Set the cursor to .
Your device will maintain a tempera-
ture of 7°C ±3°C, corresponding to
the Frost setting.
PROG
PROG
Set the cursor to the desired
position.
Remove one pin from its
holder on the back of the
control box.
Place the locking pin in the
hole opposite the arrow.
Now the setting on the control
cursor cannot be altered.
1
2
3
Cursor
PROG
LOCKING THE DEVICE’S SETTINGS
Release the device from its hanging frame (
see Page 25
).
LOCK THE CURSOR
