22
We recommend that you place the device face down on the floor,
taking care to protect its front surface from scratches.
UNLOCKING THE DEVICE’S HANGING FRAME
FIXING THE HANGING FRAME TO THE WALL
Take a flat-
bladed
screwdriver
and lift the
slider, taking
care not to
bend it.
While keeping the
slider raised, push the
hanging frame
towards the bottom
of the heater to
release the upper
brackets S2. We rec-
ommend that you wear protec-
tive gloves.
Swivel the
hanging
frame down-
wards on the
lower brackets
S1
.
Remove the hanging frame.
1
S2
2
3
4
S1
Place the
h a n g i n g
frame on the
floor against
the
wall.
L o c a t e
d r i l l i n g
points
A
.
Refit the hang-
ing frame, lin-
ing up with drilling
points
A
to find
drilling points
B
(
you can also use
a level
).
Drilling points A show the position for
the lower fastenings.
Drilling points B show the position for
the upper fastenings.
Drill the 4 holes and insert the
wall plugs. Use suitable wall
plugs when fitting on a specific
support (
e.g. plasterboard wall
).
Position the hanging frame and
screw it down.
1
2
3
4
Drilling
points A
Drilling
points B
Drilling
points A
