30
All the panel heaters in the same room must be fitted with the same function capabilities. The
energy-saving functions must be set in the same way on each heater.
We do not recommend the use of the “airing” and “ absence detection” functions in corridors
and rooms located close to an entrance door from outside your home or from the garage.
Absence detection is made from a height of over 45cm (Diagram
1
) and operates progressively (Diagram
2):
12 cm
5 m
Diagram
1
Diagram 2
E.g.: Your appliance is set to 19°C, in Comfort mode (whether programmed or not)
At 9:00, it detects your absence.
At 9: 30, its operating instructions are set to18°C.
At 10:00, its operating instructions switch to 17°C.
At 10:30, its operating instructions switch to 15.5°C.
The energy consumed by an electrical heating appliance depends, among other things, on the tempe-
rature required. The temperature recommended by the public authorities is 19°C, in Comfort mode
(
15.5°C in Eco mode
).
The “Consumption Indicator” function enables you to position yourself in accordance with this
recommended temperature.
Therefore, depending on the temperature required:
- If the second orange or red LED is lit, you can behave more responsibly by lowering your required
temperature significantly.
- If the first orange LED is lit, you can behave more responsibly by lowering your required tempera-
ture slightly.
- If the green LED is lit, you are at the recommended temperature and are already behaving respon-
sibly.
C
ONSUMPTION INDICATOR
To optimise your setting:
- Activate the energy-saving functions,
- Adopt “19°C” as a standard (
1° less = 7% savings in energy
).