44
Setting the programming source :
•
Internal programming
Internal program
This programming source is selected by default .
The device follows set programs .
Programs are prerecorded . You can change them (
see "Changing internal programs" section
) .
•
External programming
The device follows external control commands of your system by control wire connection or radio
connection
.
To control a device(s) from a control point
outside of your system, you must :
1) exchange the security key before the association at the control unit . To make it, send or receive the
security key (
see "Expert Menu" section)
.
2) authorize the association on each device if your system is equipped of our brand control unit
(
see "Expert Menu" section
) .
If some devices are connected together,
send
the security key from only one device .
If some devices are not connected together, exchange the security key on each devices .
External control
Changing internal programs :
You can program up to 3 Comfort temperature ranges for each day of the week .
Outside of these ranges, the device will reduce temperature (
default setting at -3.5°C
) .
You can change ranges by pressing and validate with
.
Examples of programming :
Two comfort temperature
ranges :
•
from 6:00 a .m . to 8:00 a .m .
•
from 5:00 p .m . to 11:00 p .m .
Three comfort temperature
ranges :
•
from 6:00 a .m . to 8:00 a .m .
•
from 12:00 p .m . to 2:00 p .m .
•
from 5:00 p .m . to 11:00 p .m .
One comfort temperature
range :
•
from 6:00 a .m . to 11:00 p .m .
