48
Settings
Setup
Functions
Peack control
Lowers the set temperature from -1°C to -2 C du-
ring higher pricing periods . These periods are indi-
cated through a private radio message which will be
sent depending on the system used . This function is
available from the EDF LINKY
®
system deployment
and requires installing the Cozytouch solution .
Led brightness
Adjusts the ring's brightness level (
power indicator
)
.
Restrictions
Max
Temperature
Records a maximum set temperature which can-
not be exceeded . It is preset at 28°C and can be
changed (from 19°C to 28°C) .
Access control Partially or completely restricts device settings .
PIN code
Enables entering a personal access code to the
Expert Menu . Once activated, access to the Expert
Menu is coded .
You can write down your
personal PIN here
To disable it, return to Expert Menu, enter your
personal PIN, and return to Settings
Restrictions
PIN .
Connectivity
Sending
security key
The security key will secure your system
in
order to not interfere with a neighboring device .
The key exchange gives you the option to
associate a control unit
to your system .
Enables sending the security key to a control unit
.
Prefer this action if devices are connected .
Receiving
security key
Enables receiving the security key from a control
unit
.
Connection problem between devices may
appear if security key is not transmitted to other
connected devices .
Authorize the
association
Once key exchange is completed, this action is
necessary to allow the association with our brand
control unit
.
Reset
Connectivity
Cancels all connections (
devices connected together,
connection to the application, connection to a centra-
lized control unit
) .
Test
Main Heat .
Elem .
Starting and running the heater for 5 minutes to check the functio-
ning .
Presence
Sensor
Activates the sensor to ensure proper operation .
Radio
Test signal
emission
Checks proper radio communication between two
devices by sending a signal to a device and receiving
by another .
If the signal is weak, there is risk of loss of commu-
nication . Check the system (
distance and / or obs-
tacles between devices
) .
Test signal
reception
