Thermopatch NL-28, Руководство пользователя

Страница: 5 / 22

5
For more information about our products and how to contact us, please visit thermopatch.com
BACK TO INDEX
3. Operating instruction
3.1 Installation
Unpacking
• Remove the press from its packaging.
• Place the machine on its operating location.
• For carrying the press, ensure that the press is cold and move the press by holding the two plates
(top and bottom) at the same time (closed press).
• Remove the screw labelled « Transport security » before opening the press.
• Plug the machine into the electrical mains (230 Volt grounded / 50 - 60 Hertz).
Clamping handle (2)
Control Panel (1)
Sliding plate (7)
180° Reversable
Lower platen (6)
Pressure
Adjustement wheel (3)
Electromagnet
Heating platen (4)
Silicone rubber
Sliding plate handle (5)