24
3.8
DATA TRANSFER
The
SM QUATTRO
is supplied with an internal reusable 2.5 (Approx.) year
databank. The contents of this databank may be transferred directly to the PC
using the MASTERLINK Software, alternatively, the MASTERLINK Hardware
may be used as an intermediate storage device to transfer data to a PC at a
remote location.
3.8.1 Transferring Data using the Masterlink Software
NOTE: Before data can be transferred to the PC, the software must be
set up on the PC, as per the MASTERLINK Software Manual.
(a)
Plug the 8 way SX plug of the ‘PC Cable Assembly’ into the SERIAL LINK of
the SM QUATTRO.
(b)
Then plug the 9 way ‘female D type’ connector into any free serial port in the
PC.
NOTE: For Panelmount units, read section 3.9 before attempting to
download or print data.
3.8.2 Transferring Data to the Masterlink Hardware
(a)
Connect the ‘MASTERLINK Cable Assembly’, from the SERIAL LINK SX
socket of the SM QUATTRO to the MASTERLINK Hardware.
(b)
Press the
key to reveal the following screen:
THERMOMAX
3
4
DATA TRANSFER
MASTERLINK
PRINTER
CANCEL
(c)
To download data to the Masterlink Hardware unit, (Part No. C0321), press
the
key and the following screen will appear:
