8
•
To revise the telephone numbers, repeat the previous procedure.
•
To clear a recorded telephone number, do as follows:
→
→
6
→
→
Sequence of telephone number
(select only one key)
•
Due to the nature of some particular phone systems, busy tone or ring back
tone cannot easily be distinguished. To overcome this problem, press the
!
key after the telephone number for deferred playing (Autodialer /
QuickDialer will start playing messages 3.6 seconds after dialing the phone
number) :
→
→
6
→
Sequence of telephone number
(select only one key)
→
7
6
→
!
→
Telephone Number
Deferred
Playing
•
For a telephone number without the “deferred playing”setting, the Autodialer
/ QuickDialer will try to determine the tone within 7 seconds after dialing the
number. If it is ring back tone, the Autodialer / QuickDialer will start playing
the messages; otherwise, it will hang up and dial the next number 5.5
seconds later or redial the same number 30 seconds later.
2.
Pager Numbers
If the Autodialer / QuickDialer is dialing a pager, it may need to wait a while
before sending the paging message. This is achieved by entering one or
more
after the pager number. (Each
delays the system
operation for 3.6 seconds). In order to determine how many
to enter
after the pager number, preliminary trial is absolutely required.
→
→
6
→
Sequence of telephone number
(select only one key)
→
0
7
0
0
7
6
→
Pager Number
→
---------------
→
Waiting for transferring Prefix
→
7
6
→
→
Display Number
Prefix
