Thermomax SA132, Инструкция

Страница: 10 / 13

9
3. Programming an internal PABX telephone exchange through Direct Inward
System Access (DISA) facility
→ → 6 →
Sequence of telephone number
(Select only one key)
→
7
−−− →
--------------------
Telephone Number Waiting for transfer
→ → ! →
Extension Deferred
Number Playing
4. Connected to PABX system or ISDN switcher
If the Autodialer / QuickDialer is connected to an internal PABX telephone
exchange or ISDN switcher, a prefix digit (e.g. 9) is normally required before
an outside line can be obtained.
If the prefix dialing function is activated, the Autodialer / QuickDialer will dial
the first digit (prefix) entered for every telephone number, and then start dial
tone detecting function. To activate this function, enter
0
. To disable the
function, enter . The setting is done as follows:
→ 9 → → 0 →
Prefix (select only one key)
Before entering the telephone number (“27654321” for the example below),
press “9” for the dial output prefix.
→ →
6
→
Sequence of telephone number
(select only one key)
→ 9
→
7
6
→
Prefix Telephone Number
SENDING A TEST CALL
It is possible to send one test call by selecting one of the telephone
numbers to call.
→ → 6 →
Sequence of telephone number
(select only one key)
The telephone number of the test call will be dialed only once whether the
line is busy or not.