4
3.
INSTALLATION
MOUNTING THE UNIT
To mount the unit on the wall, drill two holes for the 2 screws provided into
the wall, leaving a 5cm space between them, and hang the unit on the
screws as shown in Fig. 1.
Fig. 1
CONNECTING TO TELEPHONE LINE (PARALLEL CONNECTION)
Insert the telephone line RJ11 jack to the Autodialer / QuickDialer’s phone
line socket. Connect the other end of the telephone line to the phone line
socket on the wall. See Fig. 2.
Fig. 2
CONNECTING TO POWER SOURCES
The Operating Voltage of the Autodialer / QuickDialer is 12V DC. Open the
cover as shown in Fig. 3, and connect the Autodialer / QuickDialer to the 12V
DC output of an alarm panel or 1 12V battery.
The QuickDialer is equipped with power input protection. When the +/-
battery polarity is connected wrongly, the red LED on the QuickDialer will not
illuminate.
Fig. 3
PRESS
