P a g e
|
4
28-7-09
CAUTION:
The range of equipment
described here are not to be used in
conjunction with large quantities of
water. The introduction of water and the
resultant vapour could result in
premature component failure.
WARNING:
Do not use flammable
solvents or combustible materials as fire
or explosion may occur. This equipment
uses components which may be a
source of ignition.
FUNCTION
To provide an accurate controlled temperature between a5°C to +60°C.
PRINCIPLE OF OPERATION
The range of
large
above ambient incubators are ideally suited to large scale
operations where volume throughput is desired.
The models feature heavy duty insulation and multi glazed door(s), these combine to
minimise heat loss, allow
visual
access to the product under evaluation whilst not
disturbing the operating conditions. The door(s) close on a magnetic gasket and are
further secured with positive action door latch(es).
The external is powder coated steel.
The desired operating temperature is set at the temperature controller. A signal from
the temperature sensor is monitored at the controller. The resultant calculated pulsed
output is directed to a solid state relay which switches power to a solid state relay
and to the ceiling mounted element(s).
The circulating fans gently move the air across the element(s) exiting at the rear
perforated panel, throughout the chamber before rising to the fan inlets at the ceiling.
To minimise loss of conditions, the circulating fans will be isolated when the door(s)
are open and restart upon closure.
PERFORMANCE
The operating range for this equipment is a5°C to 60°C with a control
accuracy of 0.2°C.
MAXIMUM TEMPERATURE
For this product is 60
°
C.
C-TICK
The equipment referred to here complies with requirement of AS/NZS 1044:1995
electromagnetic interference (EMI).
