Stand: 12.01.2021
Seite 11 / 13
Thermokon Sensortechnik GmbH, Platanenweg 1, 35756 Mittenaar, Germany tel: +49 2778 6960-0 fax: -400
STC-DO8_Typ3_EasySens_Datasheet_en.docx © 2021
»
GENERAL SETTINGS
In the menu “General” general settings for the STC-DO8 can be determined which are valid for the complete device and which are not assigned
to an output or comfort time.
Language
Setting of menu language.
Possible selections: German, English
Factory setting: German
Transmission Time (Type STC-DO8 only)
Setting of the STC-DO8 transmission time.
Adjustable range: 10, 100, 1000 seconds
Factory setting: 100 seconds
Volume of Button Sound
Setting of button sound volume.
Adjustable range: 0…10
Resolution: 1
Factory setting: 5
Background Illumination Period
Setting of background illumination period.
Adjustable range: 1…60 minutes
Resolution: 1 minutes
Factory setting: 15 minutes
Function of Output 8
Instead of a standard switching output, output 8 can
also be used for an OR-function of output 1...7.
In this case, output 8 is always switched-on as soon
as at least one of the outputs 1 to 7 should be
switched-on (OR-function of the outputs 1 to 7).
Possible selections: Standard function or OR-
function
Factory setting: standard function.
Safety Code
Setting of a four-digit safety code protecting the
STC-DO8 against unauthorized access.
Adjustable range: 0000 ... 9999 (0000 deactivates
the saftey code)
Resolution: 1
Factory setting: 0000
Button F5 increases the selected number by 1.
Button F6 selects the next number of the four-digit
code.
Load Factory Setting
The STC-DO8 can be reset to the original factory
setting in the menu “General>Load Factory
Settings”.
To load the factory settings, F5 must be actuated in
the corresponding menu and the following security
query must be confirmed.
