Seite 10 / 13
Stand: 12.01.2021
Thermokon Sensortechnik GmbH, Platanenweg 1, 35756 Mittenaar, Germany tel: +49 2778 6960-0 fax: -400
STC-DO8_Typ3_EasySens_Datasheet_en.docx © 2021
»
PARAMETERIZATION OF TIME SWITCH
In total, there are 8 times by which the integrated time switch can be configured. The times can be field assigned to every output and weekday.
»
SETTING OF TIME AND WEEKDAY
The internal clock of the STC-DO8 is set via the menu “Time”. Therefore, the sub-menus “Clock”, „Day and month“, „Year“ and “clock change” are
available.
To make sure that the clock is also working correctly after a power failure, the STC-DO8 has an integrated energy buffer supplying the internal
clock automatically for >24 hours.
Time switch 1…8 (time)
Time setting for the corresponding time switch.
Factory setting: 6:00 ON and 23:00 OFF
Time Switch 1…8 (output)
Assignment of the individual week days and outputs
for the corresponding time switch.
Key F3 reverses the selection of the weekday
chosen. F4 selects a weekday. F5 reverses the
selection of the output/channel chosen. F6 selects
an output.
Example:
By means of this setting the time switch 1 is
activated on all 7 weekdays and is assigned to
output
3.
Time
Setting of current time.
Day and Month
Setting of current date.
Year
Setting of current year.
Clock Change (summer/winter)
Setting of clock change (summer/winter) mode.
