ThermoFLUX Pelling 100, Руководство пользователя и по обслуживанию

Страница: 14 / 50

PELLING
14
Display
8
Info
9
Clock
10
Water temperature indicator
Regulation on the boilers ''Pelling'' is most important electronic component. It is
consisted of key controling modul set under the cover of the boiler and controling unit
with display set on the front side of the boiler. With controling unit it is possible to
control functions of the boiler and also to check information about present state of the
boiler.
Due to the possibilty to work in 5 (five) different powers, regulation can satisfy needs
to increase or decrease heating by automatic adjustment of power.
If there is a need to increase power, this is registered by regulation and regulation
gives a signal to increase power by adding more pellet as well as proportional increase
of air flow in the burning basket.
When desired temperature is reached (need for heating energy is satisfied) regulation
is decreasing power ( modulates ), or when room thermostat gives signal that set
temperature is reached, boiler then goes into shut down (if mode STAND-BY is ON ).
7
When mark is visible
Clock  programmed ignit. active
Heater  heater active
Pelet dosage  auger active
Smoke fan  fan active
Primary air fan  fan active
Circulating pump  pump active
Alarm  alarm active
7