ThermoFLUX INTERIO, Руководство пользователя и по обслуживанию

Страница: 29 / 51

28
6.2 Principle of stove operation
Principle of the stove operation is very simple.
When button for start is pressed stove goes into IGNITION MODE. START is displayed,
and after that PELLET IGNITION. Usually this phase lasts for 5-15 minutes depending
on type of the stove and pellet quality. At that point dosing system is activated, igniter
and suction fan. Dispenser is making initial dosing of pellet into burning basket. At the
same point igniter starts to ignite pellet and suction fan is on and is making necessary
underpressure needed for combustion. When temperature sensor for flue gasses
detects that temperature in the chimney has reached necessary value, regulation then
changes working mode of the stove into FLAME STABILIZATION.
This phase (FLAME STABILIZATION) lasts for 2-3 min. (depending on the type of the
stove and in this phase igniter goes off. After flame stabilization, stove goes into the
normal working mode and changes power from power 1 to set power. On display is
written WORK. On the right side set power is displayed and in the last
Start
PELLET IGN.
Flame
stabilization
WORK