TM
6
Electric Tankless Water Heater -
Installation Manual and User Guide
EN
EMPLOYER UNIQUEMENT DES CONDUCTEURS DE CUIVRE.
POSER UN CONDUCTEUR DE CONTINUITÉ DES MASSES CONFORME AU CODE CAN-
ADIEN DE L’ÉLECTRICITÉ, PREMIÈRE PARTIE.
Chaque élément chauffant porte le numéro de pièce du fabricant ou son calibre
électrique en tension et en ampères / watts.
L’espacement spécifique entre l’appareil et la surface adjacente.
CONSERVEZ CES INSTRUCTIONS
The appliance is not to be installed in locations where freezing can occur.
The resistivity of the water supply must not be less than 3300 Ω
•
in.
The appliance must be grounded properly!
The appliance is close-outlet type, the water connection of this appliance must
be connected to unvented water heating system.
No changes may be made to the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its ser-
vice agent or similarly qualified persons in order to avoid a hazard.
Declaration of conformity
We hereby declares that the Thermoflow devices comply with the following standards:
• CAN/CSA E60335-2-35
• CAN/CSA-C22.2 No. 60335-1
• UL 499
Standards and regulations
The installation (plumbing and electrical work), commissioning and maintenance of this
appliance should only be undertaken by personnel with electrical engineering qualifica-
tions and in accordance with the relevant standards and regulations (BSI, etc.) and this
manual.
The following should also be observed:
• The appliance name plate;
• The technical specifications.
Connection to the water supply
Compatible cold water pipe materials: steel, copper and plastic.
compact & comfort manual thermoflow -na -bare.indd 6
2020/3/24 17:16
