ThermoFisher Scientific QuantStudio 6 Pro, Руководство пользователя

Страница: 62 / 216

1.
In the region of the 384-well plate that you want to zoom in on, pinch outwards
with two fingers.
2.
(Optional) To change the region that you are zoomed in on, use two fingers to
drag the plate in the appropriate direction.
The 384-well plate can zoom in on any 96-well section. It is not limited to
specific 96-well quandrants.
If you selected a full row or column in the 96-well view, only the set of wells that
was visible in the 96-well view is selected. The full row or column of the 384-well
plate is not selected.
3.
To return to the full 384-well view from the 96-well section, pinch inwards with
two fingers.
Assign or edit a well
A target or an assay must be defined (see “Add a target or an assay” on page 62).
A sample setup file can be imported instead of assigning or editing a well manually
(see “Import a sample setup” on page 53).
1.
In the Plate tab, tap a well or multiple wells.
2.
Tap the Sample Information pane, then tap Samples .
Note:
If no wells are selected, the pane is labeled Legend .
3.
Enter a sample name.
4.
Select a sample type from the dropdown list.
5.
Tap Target/SNP , then select Target or Assay from the dropdown list.
6.
Tap a row in the table, then tap Done .
Add a target or an assay
1.
In the Plate tab, tap a well or multiple wells.
2.
Tap the Sample Information pane, then tap Target/SNP .
3.
Tap a row in the table, then tap Add New .
4.
Enter the target, then select the reporter dye and the quencher dye from the
respective dropdown lists.
5.
Tap Add Target , then tap Close .
Assign the target or the assay to a well (see “Assign or edit a well” on page 62).
Chapter 4
Edit a plate before starting a run
Options to edit the well details of a plate file
4
62
QuantStudio ™ 6 Pro and 7 Pro Real-Time PCR Systems User Guide