UM-0090-B1E
DT90 Range User Manual
Page 17
RG
Alarm mode may trigger:
-
A change of transmission intervals (settings in
Data Transmission
tab), however it will not change the sampling
interval on that channels.
-
Sending one text message to maximum three destination number.
Alarm Configuration
This setting will allow user to set alarm threshold from three possible alarm events. The selection is limited to upper or
lower threshold exclusively, which mean only one threshold can be selected on every event. There are 3 thresholds in
total which usable across all 26 channels.
Figure 16:
Alarm configuration and placement on a channel
SMS Configuration
SMS Configuration page is used to set destination number for SMS, there are 3 numbers available and user
can also set service center for SMS.
Figure 17:
SMS Configuration and Alarm Text
Alarm Text
Alarm test is used to define the content of SMS alarm, there are 3 entries available each is related to
destination number in SMS Configuration (see
Setting
Setting page is used to set station name on the logger and time. There is a checkbox to enable time synchronisation with
GSM network also a button to match with PC time. The checkbox is checked as a default and we recommend to keep
this setting for maintaining logger time stamp.
