THERMODYNE 742HW Скачать руководство пользователя страница 3

Страница: 3 / 20

— 3 —

: Before removing any sheet metal panels or servicing this equipment, always

perform the Electrical LOCKOUT/TAGOUT Procedure. Be sure all circuits are disconnected.

Failure to comply with this procedure can cause property damage, injury or death.

: Do not operate this equipment without properly placing and securing all covers

and access panels. Failure to comply with this procedure can cause property damage, injury or

death.

: Do not use or store gasoline or other flammable vapors or liquids in the vicinity

of this or any other appliance.

Failure to comply can cause property damage, injury or death.

: In the event of a power failure, do not attempt to operate this appliance.

Failure to

comply can cause property damage, injury or death

CAUTION: These models have glass doors. Remove carton carefully.

FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE

VAPORS OR LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER

APPLIANCE.

FAILURE TO COMPLY CAN CAUSE PROPERTY

DAMAGE, INJURY OR DEATH.

Содержание 742HW





















Результаты поиска

Содержание 742HW

Отзывы:

Бренды по названию

Популярные бренды

THERMODYNE 742HW, Руководство по установке и эксплуатации

Результаты поиска

Содержание 742HW

Отзывы:

Бренды по названию

Популярные бренды