THERMODYNE 742HW-CT Скачать руководство пользователя страница 14

— 14 —

WARRANTY

Thermodyne Foodservice Products, Inc. warrants to the original purchaser for use of each new Thermodyne 
Conductive Cooking/Holding Oven the following: Any part which proves to be defective in materials or 
workmanship within the warranty period will, subject to the terms of this warranty, be repaired or replaced 
at Thermodyne Foodservice, Inc.’s option. Claims under this warranty must be presented to Thermodyne 
Foodservice Products, Inc. in writing, promptly.

Thermodyne stainless steel cabinets are warranted for 5 years and all other original equipment parts such 
as heat transfer plates, doors, casters, fluid system components and electrical components are warranted 
against defect for 2 years from the date of purchase.

This warranty applies only to Thermodyne Conductive Cooking/Holding Ovens in the Continental United 
States. This warranty shall not apply if the oven or any part is subjected to accident, casualty, alteration, 
misuse, abuse, neglect, faulty installation, or if the date of manufacture is altered or removed.

The obligation of Thermodyne Foodservice Products, Inc. is limited specifically to the aforementioned. No 
additional guarantees or warranty, expressed or implied, to include without limitation warranties of Fitness 
or Merchantability with respect to Thermodyne Conduction Ovens and Thermodyne Foodservice Products, 
Inc. regarding other liability with respect thereto including, without limitation, liability for incidental, special, 
or consequential damages.

RESPONSIBILITIES OF PURCHASER

It is the responsibility of the purchaser to:

1.  Arrange on site electrical services in accordance with Thermodyne specifications.
2.  Receive shipment of Thermodyne conduction oven to include unloading, uncrating, inspecting for 

damage in shipment, and installation of the oven in its proper location; in accordance with installation 
instructions.

3.  Arrange that the electric services are connected properly by a qualified technician. All such connections 

must be in accordance with applicable code requirements and Thermodyne installation procedures.

Please note the specific details on the Warranty and make certain that service connections are made to 
the proper utility services. This warranty and purchasers responsibility information should be retained for 
future reference.

For assistance please call:

Toll Free:  (800) 526-9182

Local:   

(260) 428-2535

Содержание 742HW-CT

















Отзывы: