Thermocet Trimline 2050 OH, Инструкции по эксплуатации и монтажу

Страница: 3 / 40

Page 3
We hope you really enjoy the warmth of your new gas fire Read these instructions carefully before
installing and using the gas fire. Keep these instructions in a safe place. Always provide the following
information if the gas fire breaks down: model and serial number, which can be found on the unit. Your
purchase invoice is your proof of warranty.
1. General
Check the unit immediately after delivery to confirm that it has not been damaged during transport. If it is
damaged in any way, please inform your supplier immediately and provide as many details as possible.
Attention
The unit must be installed, connected and checked by a qualified fitter based on national, regional, and local
standards and regulations. The fitter must inspect the unit for tightness in relation to gas and combustion
products and correct operation of the different components and functions.
The flue tube system and the outlets in the outer wall or roof face must also meet the requirements of the
applicable regulations.
The unit falls in the closed unit category, in a set-up location without a fan and with a chimney loss that is
greater than 17 % (non-condensing).
Warning
Gas fires become hot when in use. After installation of the Gas fire, the glass surface must be considered as
active zone. The glass surface may be very hot.!
Therefore care should be taken, for example, by keeping children and those requiring help away from the
immediate vicinity of burning fires. Gas fires must not be placed on or against flammable materials
(curtains, etc.).
Contents of the packaging
1 x Fully assembled unit:
Trimline 2050 OH
1 x Remote control
2 x Restriction plate
1 x 9 V battery
4 x 1.5 V AA battery
1 x Operating and installation instructions
1 x Wood imitation set
1 x Suction cap
Additional
Mantle/support iron