THERMOBILE Coolmobile 21, Руководство пользователя

Страница: 16 / 48

16 56.001.599 - rev. 02 - 2019 Coolmobile 21-25
English
Control panel functions
Operation
running & stop
1. Power : Use to power On I Off.
2. ▼ ▲: Raises or lowers temperature and/or sleep (off)
time
3. Cool : Use to select cooling mode.
4. Low Mode : Controls fan low speed.
5. High Mode : Controls fan high speed.
6. Off Timer : To set the length of time, once
turned on, that you wish the airconditioner
to run for. You can set 0-24 hours. Time
intervals are 30mins. up to 10 hours and
then 1 hour between 10 and 24 hours.
7. Remote : From the long distance, you can control the
machine by wired remote control.
8. Room : If the LED is On, the displayed temperature is
for Room temp. If the LED is Off, the displayed
temperature is for spot temp.
9. Comp. : When the compressor is operating, the LED
is On.
10. Error : Error signal ( E1 : High Pressure, E2 :
Low Pressure, E3 : Sensor, AF: Eva Freezing)
11.
Water Full : Red light indicates ‘Tank Full’. The
compressor will shut off automatically.
Empty tank and replace in position to
resume operation.
12. Align Drain Tank : The red light indicates the water
tank is not in the correct position.
13. Display : Display Room/Spot temperature, and the
setting temp and sleep time in case of
setting them. When the user set the sleep
timer, ‘hr’ will be turned on.
(Display of ‘LO’: under the 0ºC, Display of
‘HI’: over the 50ºC).
1. START BY PRESSING THE ‘POWER’
BUTTON.
· Airconditioner will start up automatically.
· To STOP the unit, press the ‘POWER’
button once again.
2. To change fan speed, press the ‘Low’
button.
3. If you wish to operate on fan only, press the
‘COOL’ button. To resume cooling, press
the ‘COOL’ button again.
(Note : There is a 3 minute delay
when switching functions to protect
the compressor)