manualshive.com logo in svg

Thermo EPD Mk2, Техническое руководство

Поделиться
Скачать
Thermo EPD Mk2 Скачать руководство пользователя страница 69

         

         

 

 

                                                                                  

EPD/HB/40521/000 

 

ISSUE 5 

          EPD TECHNICAL HANDBOOK

 

 

 

Page 59 

10 

Disabled

.   

The EPD is not calculating dose. 

 
 
 

4.6.10 

Dose Profile 

The EPD stores Hp(10) and Hp(0.07) dose to a resolution of 1

µ

Sv in non-volatile 

store so that a profile of the dose over time can be recreated.  The interval between 
stores is set-up via the IR communications link. 
 
Both Hp(10) and Hp(0.07) dose information is stored as a dose profile, the minimum 
interval between entries in the dose profile is adjustable between 2 seconds to 35 
hours, in 2 second intervals.  The store holds up to 579 records for transitions up to 
127 

µ

Sv or less. 

 

Note:

   A dose profile interval of zero seconds turns off the dose profile function. 

 
Dose profile can only be read via the IR communications link.  Dose profile may be 
synchronised to a particular time in the future, e.g. hourly logging on the hour. 
 

Note

:  The EPD has no concept of real-time but maintains a one-second tick that is 

valid as long as the EPD is powered and not reset. 

 

4.6.11 

Event History Store 

The EPD logs up to 23 events in  non-volatile store, together with a time stamp.  
These comprise alarm and fault events see tables 4.1 and 5.2. 

 

Note

:  The Event History time store wraps round after 194 days of operation.  After 

this time previous event-associated day/date(s) cannot be considered as 
accurate. In addition elapsed time during loss of power is not recorded. 

 

Содержание EPD Mk2




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды