5
6.05 Safety Control Knob -
Model 14EG
has a safety control knob to set the desired
safety control temperature.
6.06 Safety Cutout Pilot Lamp -
When the
Safety Cutout Pilot Lamp is illuminated, this
indicates that either the Temperature Control
Thermostat or sensor has failed and that the
oven is controlling from the Safety Controller.
6.07 Glass Thermometer -
Used to indicate
oven temperature and determine proper ther-
mostat settings.
Safety Cutout
Pilot Lamp
Temp. Control
Pilot Lamp
Power
Switch
Temp. Control
Knob
Safety Adjustment
Access
7.
OPERATION
7.01
Fully open the exhaust vent shutter cap
on the top of the oven and keep it open at all
times. However, if running the oven at the
maximum rated temperature it may be necessary
to turn the cap to a more closed position to retain
heat.
Insert shelf supports into the holes punched in
the side walls of the inner chamber. Insert the
shelves into the shelf supports and try to keep an
equal distance between shelves whenever
possible. Never cover the shelves with foil or
reduce their open surface area by more than
75%, this will greatly reduce convection and
hence uniformity and control will suffer.
A thermometer is provided and should be
inserted through the hole in the vent shutter cap
such that the three metal fingers punched in the
cap converge toward the center of the cap and
the glass ring on the thermometer rests on the
top of the cap. The metal fingers may have to be
bent slightly to grip the thermometer.
1. Press the ON/OFF switch for power to the
ON position. For the 14EG only, select the
desired temperature range.
2. Rotate the safety control adjustment fully
clockwise.
3. Rotate the Temperature Control knob to
some median position.
Figure 6.1 - Controls
