Thermo Scientific VT 6060 M-BL, Руководство по эксплуатации

Страница: 26 / 45

26/45 50041981 J
3. UNIT SPECIFICATION
7/2: Kelvitron® temperature controller
Start - Up ( • = Input, IP- = Display )

Turn on main switch of the unit.

Green pilot lamp lights up.
 Digital displays light up for approx. 10 sec. (test phase),

After the test phase the display will indicate the actual temperature value, controller output indi-
cation shows the status of the output: active / non active (pilot lamp).

Press "C" key.

The actual set point appears an display (flashing).

Change set point with "+" or " key .
If the "+" or "-“ key will be pressed longer, the value of set point in the display runs
faster:
Set points up to 99.9 °C are in 0,1 °C steps adjustable.
Set points up to 300 °C are in 1 °C steps adjustable.

Press "
°
C" key once more.
 The desired set point will be stored, the display does not flash, the display shows the actual
temperature value.

The unit heats up to the desired temperature.
If the "°C" key will not be actuated, the old set point is maintained.
Light-emitting diode "heating"
Up / down keys
Setpoint-
key"
Temperature-
display