Thermo Scientific Vanquish Charger, Руководство по эксплуатации

Страница: 51 / 88

6 • Operation
Vanquish Charger Operating Manual Page 51
The shelf is equipped with several guide rails (levels) to accommodate
the sample racks and well plates. Each level is labeled with a number.
This level number is used for defining the sample positions in
Chromeleon.
1. If you use sample racks, place the vials in the sample rack.
2. Place each sample rack or well plate on a free shelf level so that
position A1 is at the front right-hand corner as shown in the figure.
Figure 8: Placing the sample racks or well plates
3. Verify that well plates and sample racks are properly positioned on
the guide rails of the shelf. The edge of the sample rack or well plate
must not extend beyond the stops at the front and rear of the guide
rail.
TIP Check the Chromeleon 7 ePanel or Chromeleon 6.80 panel for the
Charger for sample rack and well plate information. This may be helpful,
for example, to find out which shelf levels are free to place a new
sample rack or well plate.