Thermo Scientific thermoflex, Быстрые руководства пользователя

Страница: 206 / 220

Thermo Scientific D-6 ThermoFlex
Appendix D
Thermo Scientific
The following values are the factory defaults for the millivolt setting that will effectively yield 10mv/°C:
MilliVolts (10mv/°C)
High mv 1000.0mv
Low mv 0.0mv
High temp 100.0°
Low temp 0.0°
With
Millivolts
highlighted press enter to display:
USER MV
High MV 1000.0
Low MV 0.0
High Temp 100.0
Low Temp 0.0
These values are used to calculate a gain and offset and are applied to the set point input voltage.
Milli�oltInputGain � �high temp � low temp� � �high m� � low m��
Milli�oltInputOffset � high temp � �high m� � Milli�oltInputGain�
So that the default settings will yield the following gain and offset for set point input:
Milli�oltInputGain � �1�� � �� � �1��� � �� � �.1
Milli�oltInputOffset � 1�� � �1��� � �.1� � �
�ow 1��m� will yield a set point of 1�° � �1�� � gain� � offset��
�1��m� � �.1� � � � 1�.�° � 1�m��°C
Just like voltage the mv range can be set for other ranges.
A separate gain and offset will also be calculated and are applied to the DAC temperature output value.
Milli�oltOutputGain � �high m� � low m�� � �high temp � low temp�
Mili�oltOutputOffset � high m� � �high temp � Milli�oltOutputGain�
So that the default settings will yield the following gain and offset for temperature output.
Milli�oltOutputGain � �1��� � �m�� � �1�� � �� � 1�
Milli�oltOutputOffse � 1��� � �1�� � 1�� � �
�ow 1�° will output 1��m� ��1� � gain� � offset�
�1�° � 1�� � � � 1��m� � 1�m��°C
Highlight the desired value and then press enter, the high-
value. Once the desired value is displayed press enter to