Thermo Scientific STP-120, Руководство по обслуживанию

Страница: 6 / 42

STP 120 Tissue Processor - Service Manual
Page 6
Programming
Number of programs 10 (selectable)
Programmable infiltration time per station from 1 s to 99 h 59 m
Rotation stirring selectable
Vertical shake selectable
Centrifugation selectable
Centrifugation time selectable
Program start delay selectable without time limit
Environmental conditions
Humidity max. 80% without condensation
Temperatures from 5 to 40 °C
Applied Directives and Standards:
Directives
73/73/CEE Referring to the approximation of the legislation of the Member States on electrical
material destined for use within determined voltage limits
89/336/CEE Referring to the approximation of the legislation of the Member States on
Electromagnetic Compatibility
Standards
Electrical Safety
UNE EN 61010-1(96)
+ A2 (96) + A2 Erratum (98) Safety requirements for electrical equipment for measurement, control and laboratory
use. Part 1- general requirements.
UNE EN 61010-2-010 (96)
+ A1(97) Safety requirements for electrical equipment for measurement, control and laboratory
use. Part 2- Particular requirements for laboratory equipment for the heating
materials.
UNE EN 61010-2-010 (99) Safety requirements for electrical equipment for measurement, control and laboratory
use. Part 2-010: Particular requirements for automatic and semiautomatic analytical
equipment
Electromagnetic compatibility
EN 61326-1, 1997 Electrical equipment for measurement, control and laboratory use. EMC
requirements. Part 1: General requirements.
CISPR 22, 1993 Limits and methods of measurements of radio interference characteristics of
information technology equipment.
EN 55015, 1993 Limits and methods of measurements of radio interference characteristics of
household electrical appliances, portable tools and similar electrical apparatus.
IEC 1000-3-2, 1995 Electromagnetic compatibility (EMC). Part 3: Limits. Section 2: Limits for harmonic
current emissions (equipment input current £ 16 A per phase)
IEC 1000-3-3, 1995 Electromagnetic compatibility (EMC). Part 3: Limits. Section 3: Limits of voltage
fluctuation and flicker in low voltage supply systems for equipment with rated current
£ 16 A
IEC 1000-4-2, 1995 Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques.
Section 2: Electrostatic discharge immunity test. Basic EMC Publication
IEC 1000-4-3, 1995 Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques.
Section 3: Radiated, radio-frequency, electromagnetic immunity test. Basic EMC
Publication
IEC 1000-4-4, 1995 Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques.
Section 4: Electrical fast transients/ burst immunity. Basic EMC Publication
IEC 1000-4-5, 1995 Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques.
Section 5: Surge immunity test. Basic EMC Publication
IEC 1000-4-6, 1996 Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques.
Section 6: Immunity to conducted disturbances, induced by radio-frequency fields
IEC 1000-4-11, 1994 Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques.
Section 11: Voltage dips, short interruptions and voltage variations immunity tests.