Smart Remote Contact
Smart-Vue Pro Solution Installation Procedure | 15
7. Ensure data logger is added.
8. In Sensor page, verify the associated sensor serial
number shown.
Figure 12. Sensor Serial number display
9. In Infrastructure, add the LoRaWAN details.
Figure 13. Create Infrastructure
10. To add a gateway, in serial number field, add the node id
mentioned on the Gateway label.
Figure 14. Enter node id
11. To add a Smart Remote contact, in serial number field,
add the required serial number.
Figure 15. Fill the details
12. Create an equipment to link the device and its sensors,
which are under test.
13.
Figure 16. Create an equipment
