Smart Remote Contact
Smart-Vue Pro Solution Installation Procedure | 13
Smart-Vue Pro Solution Installation
Procedure
1. Ensure Smart-Vue Pro Quatro is connected with sensors
and sensor value is displayed in Show sensors screen.
For Example: Smart Sensor value displayed shows
sensors screen.
Figure 6. Sensor Screen
2. Ensure LoRaWAN is ON in Smart-Vue Pro Quatro.
In Smart Vue Pro Quatro device, Click Menu
Advanced
give the code which is set in Web app
which is added by user during configuring the user
setting i.e., Pin code set in web app by the user or by
default it is 000000. Then in Advanced, once a valid code
is entered, select the LoRaWAN
select ON option from
ON/OFF to enable LoRaWAN connectivety.
3. Then in Menu
Advanced
LoRaWAN
Network,
select the Thermo Scientific option and for on premise
installation select “custom”.
Figure 7.
4. After this you need to select the country from the drum
and save.
5. In Thermofisher LoRa web browser page, Configure the
Network in Smart-Vue Pro LoRaWAN settings to
communicate to Cloud. Refer Smart-Vue Pro LoRaWAN
User guide section explaining the setting up of different
networks like WiFi and Ethernet.
