Thermo Scientific SHKE6000 (4359), Руководство пользователя

Страница: 19 / 40

MaxQ 6000 Shaker 5-1 Thermo Scientific
Section 5
Operation
1. Place an average load onto the shaker platform. Set shaking speed to
250 rpm. Press START/STOP to activate platform rotation.
2. Set torpedo level onto top of MaxQ 6000 unit. Loosen the locking nut
on the shaker feet using a 3/4” wrench.
3. Adjust the feet on both the front-to-back and right-to-left axis until the
unit is level.
4. Tighten the locking nut on all feet using a 3/4” wrench and ensure the
unit is still level. Press START/STOP to deactivate platform rotation.
1. Press power switch on the front panel to turn shaker on.
2. Press power switch a second time to turn shaker off.
1. Hold down appropriate arrow key in the speed module of the control
panel, up or down, until desired speed is set, up to 500 rpm. SET
RPM light will illuminate.
2. Press SPEED ON/OFF key to begin shaking. RPM light will
illuminate.
3. Press SPEED ON/OFF key to end shaking. SET RPM light will
illuminate.
Caution It is recommended that shaking action be started at a low speed in
order to check that all vessels are secure and that no spilling of contents
will occur.
s
Note
Speed can be changed without pressing the START/STOP key.
Simply press the appropriate up or down arrow until desired rpm is
reached. There will be an audible beep before the display lights.
Leveling the Unit
Turning Shaker On
Setting Shaking
Speed