26
Thermo Scientific Orion Star A329 Portable pH/ISE/Conductivity/RDO/DO Meter Reference Guide
Calibration Editing
*OUIFDBMJCSBUJPOTVNNBSZEJTQMBZ DPOEVDUJWJUZDBMJCSBUJPOTUFQQSFTT
f3 (cal edit)
to edit the calibration points.
2. Press
or
to highlight the calibration point to be edited and press
f2 (select)
.
3. Press
or
to highlight
Remeasure, Edit
or
Delete
and press
f2 (select)
.
a. If
Remeasure
JTTFMFDUFESFQFBUDPOEVDUJWJUZDBMJCSBUJPOTUFQTUISPVHI
b. If
Edit
is selected, press
f3 (edit)
UPBDDFTTUIFOVNFSJDFOUSZTDSFFOFOUFSUIFOFXWBMVFQSFTT
f2 (done)
and then press
f2 (accept)
. Select another calibration point to edit or press
f1 (back)
.
c. If
Delete
JTTFMFDUFEUIFDBMJCSBUJPOQPJOUXJMMCFEFMFUFE
5IFNFUFSXJMMEJTQMBZBOVQEBUFEDBMJCSBUJPOTVNNBSZBOEFYQPSUUIFEBUBUPUIFDBMJCSBUJPOMPH1SFTT
f1 (meas)
to proceed to the measurement mode, press
f2 (print)
to proceed to the measurement mode and
export the data to a printer or computer or press
f3 (cal edit)
to edit another calibration point.
Manual Conductivity Calibration
*OUIFNFBTVSFNFOUNPEFQSFTT
f1 (cal)
. In dual and multi channel measurement displays, press
or
to highlight
Conductivity – Channel
and press
f2 (select)
.
3JOTFUIFDPOEVDUJWJUZDFMMBOEBOZPUIFSFMFDUSPEFTJOVTFXJUIEJTUJMMFEXBUFSCMPUESZXJUIBMJOUGSFFUJTTVF
and place into the standard.
3. When the conductivity cell and standard are ready, press
f2 (CellK)
.
1SFTT
f3 (edit)
to access the numeric entry screen and enter the cell constant of the conductivity cell.
a. Press
,
,
or
to highlight a number or decimal point, press
f3 (enter)
to select
UIFIJHIMJHIUFEJUFNBOESFQFBUVOUJMUIFDFMMDPOTUBOUWBMVFJTTIPXO
b. Press
f2 (done)
to exit the numeric entry screen.
5IFDBMDVMBUFEDPOEVDUJWJUZPGUIFTUBOEBSECBTFEPOUIFFOUFSFEDFMMDPOTUBOUWBMVFXJMMCFTIPXOPOUIF
EJTQMBZ1FSGPSNPOFPGUIFGPMMPXJOHBDUJPOT
a. Press
f2 (accept)
to accept the cell constant value and save and end the calibration.
b. Press
f3 (edit)
UPSFFOUFSUIFDFMMDPOTUBOUWBMVFBOESFQFBUTUFQTBBOEC
5IFNFUFSXJMMBVUPNBUJDBMMZQSPDFFEUPUIFNFBTVSFNFOUNPEF
